How to Setup a Linksys Range Extender Manually in Minutes


Extend up your small network coverage area into a large network zone with Linksys Range Extender. Linksys is known worldwide for its wide best quality extender range. Linksys care for their clients. Therefore the Linksys extender setup is quite easy so that even a non-technical user can manually also just setup extender Linksys thru user manual guide in minutes.

Tips Before the Setup of Linksys Range Extender

  • Linksys Range Extender is a plug and play device, so recommend to reset before the Setup of Extender Linksys device.

  • While performing the Linksys Extender Setup keep the Extender and Router near to each other with a difference of just 1metre.

  • Once the Linksys Extender Setup is done you can place the Linksys Wifi Range Extender anywhere in the house (40 feet maximum) depending on your router network range.

How to Setup a Linksys Range Extender

Many were always get confused with the Linksys Extender Setup complex method. But not to worry now much, here in this particular section of the blog you will find the easiest method for How to Setup a Linksys Range Extender. Just follow the mentioned-below steps for extender Linksys setup-

  • Plug the Linksys Range Extender to an electric outlet and turn ON the device.

  • Click on the wireless Icon present on the taskbar and check the available networks.

  • Open the web browser in your smartphone or desktop with which the Linksys Range Extender is connected.

  • The extender will automatically open the Linksys Extender Setup page.

  • In address bar mention in the address bar of your web browser.

  • A pop admin user name and password windows screen will appear on the web browser. Mention the username and password and hit the ENTER key.

  • Once you are on the Linksys Extender Setup page just follow the instructions mentioned over the screen.

  • Click on the save button and once the extender Linksys settings are saved. Just restart your Linksys extender and place it nearly about 40feet far from your router (depending on your router current position).

Setup a Linksys Range Extender with Ethernet Cable

Many users complain that they are enabled to perform the Linksys Extender Setup via WiFi. Sometimes due to weak or poor connectivity, it becomes quite difficult to setup Extender Linksys. Fortunately, you can also Setup a Linksys Range Extender Manually with Ethernet Cable.

  • Connect Linksys Extender to the PC with Ethernet Cable.

  • Plug the Extender Linksys in the electric outlet and wait until the LED lights become stable.

  • Open the web browser and enter the in the address bar.

  • Enter username and password and click on the Login Button.

  • Enter the SSID

  • Enter the WEP key or WPA/WPA mixed key.

  • Now restart your Linksys Range Extender and router once. Keep them just away at a distance of 1 metre for 10 to 15 minutes to get sync properly.

  • After this turn of your Linksys Extender and place it away but within in the range of Router within your own residence or office.