An Introduction to WPS for WiFi Networks

Netgear WiFi Range Extender

WiFi Protected Setup (WPS) is a standard feature is available on a number of upcoming broadband home routers with the latest technologies. The process of WPS simplifies the method and procedure of setting up the entire protected and confined connections for a range of WiFi devices that connects to the home router and is also helpful in completing the procedure of Netgear WiFi Extender Setup safely and securely.  Place your extender within the range of the existing router and plug them both into an electrical wall socket. Do not proceed further until you see the solid green lights on both the devices.

Netgear WiFi Extender Setup

Note: Assured and definite security risks of WPS technology necessitate concern and caution.

Use of WPS on a Home Network

  • Automatically gets configured the WiFi clients and the local network.
  • Uses the valid SSID and WPA2 security to protect and secure devices and the connections.
  • Eliminates the physical, manual, and error-prone steps of configuring shared and common wireless security keys transversely the network that is private.

But remember, it only works when both the WiFi client’s devices and the home router support such an advanced feature. Well, an industry group of institute named WiFi alliance has worked to normalize and regulate the latest technology, different upcoming brand of routers, clients and the range extenders likely to execute the facts of WPS. Using it generally involves choosing between the three modes of operation:

  • Push Button Connect Mode
  • PIN mode
  • The NFC Near Field Communication mode

The WPS process is also applicable for the Netgear WiFi Range Extender process if a user failed to go through mywifiext. Unplug the Ethernet cable that is used for connecting the router and the mentioned device. After that, push the WPS button once and then plug in all the wires again.

  1. PIN Mode WPS

Well, those routers which are WPS capable allow WiFi clients to unite with the local network using an 8 digit pin for personal identification. Whether the PIN of a single client supposed to be linked with the router or the router’s PIN supposed to be linked with every client.

Various WPS clients hold their own PIN as assigned by the maker (producer) but on the other hand network administrators attain this PIN either from client’s credentials, a sticker attaches to the unit or a menu option on the software of the device. Note: Enter the PIN into the WPS configuration screen of the smart device (router or the extender) console.

  1. Push Button Connect Mode

Some routers that hold and support the feature of WPS only require one push to reboot the entire system.  Also, remember that it is when pushed, momentarily places the device into a particularly protected mode where it will acknowledge a connection appeal from a new client of WPS.

Note: On the other hand, the router could possibly integrate an effective and fundamental button within its configuration screens that serves the same intention of use.

Similarly, for the process of Netgear Genie Setup, the WPS button on the device supposed to be pushed first, followed by the subsequent button situated on the client device.

  1. The NFC Mode WPS

It may also interest you to know that the WiFi alliance prolonged its complete focus on WPS to contain the NFC mode supported by a third party or unknown device. The WPS enables the NFC mode in order to unite WiFi networks by merely drumming two proficient and skilled devices together, particularly useful and valuable for smartphones, devices, small electronic IoT gadgets, etc. well, this type of WPS leftovers in an early stage of implementation, conversely supported by few WiFi devices in today era of modern technology.